click
image to enlarge
 |
Zack
preps chassis interior. This includes installing input jacks
and filament wires, and checking over component mounting
and connections. |
 |
Completed
chassis interior showing hand wired/chassis mounted tube
sockets, jacks and switches. |
 |
112
combo amp with externally mounted chassis and reverb tank
shelf, affectionately known as "Testy". Testy
is primarily used to screen all pre-amp tubes for hum and
microphonics. |
 |
Zack
installing matched and burned power tubes, tested pre-amp
tubes and knobs. |
 |
Kraig
play-testing chassis. Chassis is then installed into cabinet
and play-tested again. |
 |
Jesse
assembling cabinet. This includes installing Reverend speaker,
handle, feet, grill and speaker lead. |
 |
Jigs
for hand wiring chassis input jacks and speaker leads. Heavy
16 gauge cable is used for speaker leads and Y-cables. |
 |
Assembled
cabinets awaiting chassis installation. On the right: lone
Naylor Superdrive Sixty head from days gone by (no we can't
make these anymore). |
 |
Kraig
serial numbers and initials back of chassis after final
testing and inspection. |
 |
Jesse
testing Drivetrain II overdrive pedal before shipping. |
 |
Joe
and Kraig tone testing the Goblin 5/15 prototype. |
| |
|
