Reverend Speaker Owner's Manual

Mounting Speaker:

1. Mount speaker using at least 4 of the 8 mounting holes.

2. Tighten mounting nuts/screws a quarter turn at a time, alternating between opposing nuts/screws. Completely tightening one nut/screw before the others may warp the speaker frame causing permanent damage. Do not over-tighten nuts/screws, only moderate pressure is necessary.

If you do not feel confident installing your speaker, have it done by a professional technician.

Miscellaneous:

• Note wattage rating on speaker label. This should be approximately equal to or greater than amplifier RMS wattage rating. Multiple speakers can be combined for higher total wattage rating (e.g. two 50 watt speakers equals 100 watt rating).

• Speaker will produce optimum tone after a break-in period of approximately 15 minutes at stage volume.

Speaker Warranty
Reverend speakers are covered by a 30 day limited warranty from date of purchase. Warranty covers defective workmanship or materials only. Warranty does not cover normal wear, or damage caused by misuse, abuse, modification, or acts of nature. Modification to product may void warranty. Warranty service must be preauthorized by Reverend, and performed by Reverend or an authorized Reverend service facility. If you have any questions concerning your Reverend speaker contact your local Reverend dealer, or contact us directly at 586-775-1025.